This section describes how to configure
system parameters in situations where
you may have a WSM box with pre-installed
software. Using a utility called “wjanitor”,
you can perform the following tasks:
Overview: The WSM system parameters
are set by using a utility called “wjanitor”.
- From the wjanitor main menu, select
option 5
========================
= wjanitor main menu =
========================
1. Check RPM Status
2. Repair RPM Database
3. Enable Keyboard Abort
4. Disable Keyboard Abort
5. Update WSN System Parameters
6. Log out
Enter selection: 5
- The following screen appears:
The options below
will allow you to update some of
the WSN System parameters including
the time/date.
Please note that some of these options require
the WSN applications to be stopped and some
options will force an automatic WSN reboot
after the updates are made.
- Select an option:
1) Update WSN Time and
Network Parameters (hostname, IP, VLAN
ID)
2) Update Time/Date/Timezone Only
Enter your choice: 1
The current time and date are: 14:05:01 Fri
Sep 16 2005
The current timezone is: US/Central
You have the
choice of changing
the time/date
or the timezone.
- Please
select one
below:
1)
Change timezone
and time
2) No change, everything looks good.
Enter your choice: 2
- The system
responds:
OK, Change
Network Parameters
Here
is the current
info:
----------------------------------------
Hostname : [FORTWORTH]
Domain Name : [comm.mot.com]
WSN IP : [203.8.72.108]
DNS IP 1 : [203.8.72.77]
DNS IP 2 : [none]
DNS IP 3 : [none]
ROUTER IP : [203.8.72.110]
VLAN ID : [4]
NETMASK : [255.255.255.0]
---------------------------------------
- Enter the
New Hostname
for this
WSN
To keep
the current
value (FORTWORTH),
just press
[Enter]:
- Enter the
New Domain
Name for
this WSN
To keep
the current
value (comm.mot.com),
just press
[Enter]:
- Enter the
New IP address
for this
WSN
To keep
the current
value (203.8.72.108),
just press
[Enter]:
- Enter the
New IP address
of the DNS
server #1
If you do
not want
a DNS Server
#1, enter
0
To keep
the current
value (203.8.72.77),
just press
[Enter]:
- Enter the
New IP address
of the DNS
server #2
If you do
not want
a DNS Server
#2, enter
0
To keep
the current
value (none),
just press
[Enter]:
- Enter the
New IP address
of the DNS
server #3
If you do
not want
a DNS Server
#3, enter
0
To keep
the current
value (none),
just press
[Enter]:
- Enter the
New IP address
of the Default
Router
To keep
the current
value (203.8.72.110),
just press
[Enter]:
- Enter the
New VLAN
ID (range
= 1 to 4094)
If you do
not have
a QoS enabled
VLAN, enter
0
To keep
the current
value (4),
just press
[Enter]:
- Enter the
New Netmask
To keep
the current
value (),
just press
[Enter]:
